Rocket, where's my shaft?!

JayBaltimore · **Posted:** Thu Jul 29, 2010 6:40 am

i've sent you pm's, i've said things in your threads. it's been a while since VF just to re-work my 1984 shaft i gave you at VF. i'm starting to get a little irritated. if you can't do it, send me my shaft back, i don't care. i just want the damn thing back!

rocketq · **Posted:** Thu Jul 29, 2010 7:54 am

First of all Deuce the email you posted in the pm got returned to me fix your crapcast email.
Second of all you missed the thread.
viewtopic.php?f=6&t=33
Third I am building a new shaft from scratch. Because that thing you gave me was twisted like a dog's hind leg. That shaft is toast. I didn't have anything in the shop with anything close to that taper so I took one from around 16mm at the tip and have been cutting that. So your new shaft is not done yet. I hope to be taking the final cut this weekend and then finishing it next week.
I told you all of this in VF making sure you understood it wasn't going to be quick. The shaft will be right. It will be the correct rings and ferrule and it will be about 2 weeks till you get it.
You have my number why not call if you are so concerned. Or hell for that matter you have my address take a ride up.

John

JayBaltimore · **Posted:** Thu Jul 29, 2010 9:28 am

stand corrected i guess. sorry for blasting you...

James...

p.s. i lost your number bud, send it to me...i've been threw like three phones since march.

rocketq · **Posted:** Thu Jul 29, 2010 10:22 am

It is on the website.
I don't post to slow junk calls.

John

pharaoh68 · **Joined:** Wed Apr 02, 2008 12:39 pm **Posts:** 1085

Just sayin'...

chris byrne · **Joined:** Sat Jan 10, 2009 5:37 am **Posts:** 173

I agree with Jay. Your an A hole rocker!! lol

qbilder · **Joined:** Sat Apr 26, 2008 10:34 am **Posts:** 477

chris byrne wrote:

I agree with Jay. Your an A hole rocker!! lol

Yeah you self absorbed egotistical bad customer serving SOB. LOL I have been learning new bash lines from my threads

JimBo · **Posted:** Fri Jul 30, 2010 2:50 am

with out taking sides I'll say that 4 months is just to long for a shaft.

Jim <---Thinks anyone should be able to turn a shaft in 2 months

MBTaylor · **Posted:** Fri Jul 30, 2010 10:30 am

JimBo wrote:

with out taking sides I'll say that 4 months is just to long for a shaft.

Jim <---Thinks anyone should be able to turn a shaft in 2 months

I think BrooklynJay had to wait about 1 1/2 years for a shaft...lol

1pRoscoe · **Posted:** Fri Jul 30, 2010 1:16 pm

JimBo wrote:

with out taking sides I'll say that 4 months is just to long for a shaft.

Jim <---Thinks anyone should be able to turn a shaft in 2 months

Be easy on John. He's got a very lengthy backlog of customers he needs to work on....

Rich R. · **Posted:** Fri Jul 30, 2010 1:33 pm

MBTaylor wrote:

JimBo wrote:

with out taking sides I'll say that 4 months is just to long for a shaft.

Jim <---Thinks anyone should be able to turn a shaft in 2 months

I think BrooklynJay had to wait about 1 1/2 years for a shaft...lol

Jay can go to Eddie Wheat and get shafted right away. :roll:

pharaoh68 · **Joined:** Wed Apr 02, 2008 12:39 pm **Posts:** 1085

Mind you all that the party doing the griping here took close to two months to make good on a $50 bet.

Just sayin'.

qbilder · **Joined:** Sat Apr 26, 2008 10:34 am **Posts:** 477

JimBo wrote:

with out taking sides I'll say that 4 months is just to long for a shaft.

Jim <---Thinks anyone should be able to turn a shaft in 2 months

Not really. If he is to copy the original taper then he's gotta start from thick stock. That takes a long time and the individual piece of wood dictates the time, not the builder. Cut a shaft in 2 months & the buyer will be back at square one with a pretzel.

rocketq · **Posted:** Mon Aug 02, 2010 8:01 am

One more cut Jay. Rings are on and only have about 5 thou to take off the shaft. What kind of tip do you want?

John

JayBaltimore · **Posted:** Tue Aug 03, 2010 6:31 am

a sniper is fine

Back to work

Rocket, where's my shaft?!

Who is online